NETGEAR ANT24D18

NETGEAR ANT24D18 Overview:

Product Features:

• Connects to NETGEAR WAG302, WG302, WG102, FWG114Pv2, FWG114P, and DG824M.
• 14 dBi antenna gain for the 2.4 GHz frequency range
• Corrosion-proof and weather resistant

Optimize WLAN Range and Power

NETGEAR’s ProSafe line of antennas and accessories for 802.11b and 802.11g devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points and physical obstructions must be accounted for. With both directional and omni-directional antennas, low-loss cables, mounting hardware, and other accessories, installers can customize a value-priced wireless solution that meets the requirements of even the most challenging applications. All NETGEAR antennas are FCC-approved to work with the following NETGEAR models: WAG302, WG302, WAG102, WG102, FVG318, FWG114P.

ProSafe 14 dBi Patch Panel Directional Antenna

The ANT24D18 indoor/outdoor directional* antenna provides a 3-in-1 solution for mixed applications in combination with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly connect LANs between buildings in a campus-type environment. Three, it provides multifloor transmission when placed on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting options (fixed wall, wall adjustable, and pole), cable sold separately.

* Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception in a single direction.

Note: To obtain optimal results in extending wireless range with antenna installations, it is recommended that a qualified, professional installer is consulted for site survey and proper installation.

To comply with FCC rules the ANT2409 antenna should only be used with devices that have been FCC approved for use with the ANT2409. Please check the NETGEAR web site at http://tools.netgear.com/legal/fcc_antennas.html for an updated list of FCC approved devices.

For EU, use of any antenna requires careful planning and extra consideration to comply with EU emissions and health standards and regulations. It is recommended that a qualified professional installer service is consulted for site survey and proper installation. Antenna installation must comply with the maximum level authorized by each country.

Devices that comply with EU regulations to work with the ANT2409 are listed at http://tools.netgear.com/legal/eu_antennas.html.

Technical Specifications:

¹ Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, associating with each other at 11 Mbps under ideal line-of-sight conditions.

² Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.

Documentation:

Download the NETGEAR Antennas and Cables Datasheet (.PDF)