|

|
NETGEAR Managed Gigabit Switches |
| NETGEAR ProSafe GSM7224R
24 Port Gigabit L2 Managed Switch With Static Routing |
#GSM7224R-100NAS
List Price: $1,185.00
Our Price: $829.99 |
|
More pricing below,
click here
NETGEAR
GSM7224R Overview:
Product Features:
- Wirespeed Gigabit performance
- Full set of Layer 2+management features, including
Static Routing
- Flexible fiber connectivity enabled through
four combination Small Form-factor Pluggable (SFP)**
gigabit interfaces
High-speed, Layer 2 Managed Gigabit Switching with
Static Routing
NETGEAR delivers wirespeed Gigabit performance and
a full set of Layer 2 management features, as well as
static routing with unsurpassed affordability. This
next-generation, high-speed switch delivers maximum
throughput where you need it — to high-performance workgroups
at the edge of the network, or as a backbone for Fast
Ethernet switches and high-speed servers in demanding
small networks. The non-blocking design offers full
Gigabit throughput simultaneously to all 24 or 48 10/100/1000
ports to ensure reliable performance. Flexible fiber
connectivity is enabled through four combination small
form-factor pluggable (SFP)** gigabit interfaces. Layer
2 management functionality delivers reliability, control,
and availability. Static routing enables inter-VLAN
routing and provides a faster network and more effective
bandwidth management. Access control lists (L2-L4) provide
robust security, while L2-L4 based QoS provides enhanced
traffic management capabilities. The cost-effective
NETGEAR ProSafe 24- and 48-port Gigabit L2 Managed Switch
creates a more productive — and futureproof — network.
With increasing bandwidth requirements from applications
such as voice, video, database management, and other
services that slow throughput and response time, you
can unleash your network and enable maximum productivity
with Gigabit Ethernet for today’s high-performance environments.
Optimize bandwidth, security, and control with full
Layer 2 management capabilities. Network administrators
can use any combination of these features to ensure
uptime, availability, bandwidth and throughput.
Powerful
Full 24 or 48 10/100/1000 ports and a non-blocking
design provide wire speed throughput and maximum bandwidth
for the most demanding network environments. Small form-factor
pluggable (SFP) modules deliver choice in 1000BASE-SX,
1000BASE-LX or 1000BASE-ZX (70Km) optics. The Layer
2 management features optimize bandwidth throughout
the network--delivering Gigabit performance to systems,
applications, and services. Take advantage of forwarding
rates up to 71.4 million pps, and a switching capacity
of 96 Gbps.
Easy-to-use
Move up to Gigabit power in minutes. Use either of
these solutions as a managed switch out of the box –
just plug and play! All ports are auto-negotiating and
support Auto Uplink™ technology. Choose from two easy-to-use
management interface options –Web interface or a command
line interface available through console or telnet.
Comprehensive remote administration capabilities reduce
the need for on-site administration. Easy to troubleshoot--built-in
testing capability locates cable-related network problems.
Manageable
Meet your management needs with SNMP (v1, v2c and
v3), RMON, Command Line Interface (CLI) and completely
redesigned Web-based GUI, ProSafe Control Center. Advanced
features include up to 512 VLANs, DiffServ traffic prioritization
and 802.1p (QoS) for Voice over IP services (VoIP),
broadcast storm protection, RADIUS, 802.1x, port trunking,
Rapid Spanning Tree, and link aggregation. In addition,
L2-L4 based ACLs provide robust security, while static
routing enables inter-VLAN routing for effective bandwidth
management. Full Layer 2 implementation allows you to
configure your network for maximum performance, reliability,
and availability. Manageable with any popular SNMP-based
management software, but optimized for NETGEAR ProSafe
Network Management Software NMS100.
Outstanding
These products offer Layer 2 management and full
Gigabit power at a compelling price. Use at the edge
to improve workgroup connections, or at the core to
upgrade a Gigabit Ethernet backbone — now you can afford
the power your network deserves. Like all NETGEAR products,
everything you need is in the box--including rack-mount
kit, power and serial cables, and more.
“Tolly Group Inc tested NETGEAR
Fully managed GSM7224R against HP 2824 and Linksys SGE2000
switches. GSM7224R demonstrated superior performance,
scalability and energy efficiencies, while delivering
a broad set of features and functionalities. The report
can be downloaded from
http://www.tolly.com/DocDetail.aspx?DocNumber=208323
* Free basic installation
support provided for 90 days from date of purchase.
Advanced product features and configurations are not
included in free basic installation support; optional
premium support available.
† Lifetime warranty for product purchased after 05/01/2007.
** Use with AGM731F 1000Base-SX SFP module, AGM732F
1000Base-LX SFP module or the AGM733 1000Base-ZX (70Km)
SFP module.
Technical Specifications:


|
NETGEAR GSM7224R
Specifications |
|
Network Protocol and Standards Compatibility |
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3z 1000BASE-X
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x Flow Control
|
|
Layer 2 Services |
- IEEE 802.1Q static VLAN (up to 512)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1v protocol VLAN & port
VLAN and MAC-based VLAN
- IEEE 802.1 Q-in-Q
- IEEE 802.1w Rapid Spanning Tree
- IEEE 802.1s Multiple Spanning Tree
- IEEE 802.3ad link aggregation (Static,
LACP)
- IEEE 802.1x port access authentication
- IGMP v1, v2, v3 snooping support
- Static multicast filtering
- Ingress rate limit in 1 Kbps increments
- Weighted round robin (WRR) query
technology
|
|
Layer 3 Services |
- IGMP Querier
- COS
- Diffserv QoS
- Static routing
- ARP
|
|
Security |
- Access Control Lists (ACL) - MAC,
IP, TCP
- ACLs: L2/L3/L4
- Network Storm Protection including
broadcast multicast and unicast traffic
- Protected ports
- MAC filtering
- Port locking
|
|
Switch Management Specifications |
- SNMP v1, v2c, v3 with multiple IP
addresses
- RFC 1157, 1902-1907
- RFC 768 UDP
- UDP relay
- RFC 854-859 telnet
- RFC 951 BOOTP
- RFC 1213 MIB II
- RFC 1757 RMON groups 1,2,3, and
9
- RFC 1215 SNMP traps
- RFC 1493 bridge MIB
- RFC 1643 Ethernet interface MIB
- RFC 1534 DHCP and BOOTP interoperation
- RFC 2131, 2132 DHCP and BOOTP
- RFC 2865 RADIUS (both switch and
management access)
- RFC 2866 RADIUS accounting
- Private enterprise MIB
- Port mirroring support (many-to-one)
- RFC 2236 IGMP v2
- DHCP/BOOTP relay primary and backup
(RFC3046, option 82)
- RFC 2030 Simple Network Time Protocol
(SNTP)
- DHCP server
- GARP/GVRP/GMRP
- SYSLOG
- Firmware upgrade via TFTP or HTTP
- Port description
- RFC 1519 CIDR
- Proxy ARP
- DNS lookup
|
Single IP Address Management
(firmware version 7.3 or higher) |
- Manage up to 48 fully managed switched
- Feature can be used with the following
models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328PS,
FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7328FS, GSM7352S
|
|
LEDs |
- Per port: Speed, Link, Activity
- Per device: Power, fan, RPS status
|
|
Physical Interfaces |
- RJ-45 Connectors for 10BASE-T, 100BASE-TX,
and 1000BASE-T (Auto Uplink™ on all
ports): 24 ports
- Small form-factor pluggable (SFP)
modules for fiber Gigabit Ethernet interfaces:
4 slots
- RS-232 Console Port
|
|
Performance Specifications |
- Forwarding modes: Store-and-forward
- Bandwidth: 48 Gbps; 35.7 Mpps
- Switch latency: 20 μs for 64-byte
frames (1G to 1G)
- System memory: 64 MB
- Packet buffer memory: max support
0.75 MB buffer memory
- Code storage (flash): 32 MB
- Address database size: 8K media
access control (MAC) addresses
- Number of VLANs: 512 (1-4093)
- Number of trunks: 16
- Number of queues: 8
- Number of static route: 32
- Number of routed VLANs: 32
- Number of ARP entries: 480
- Number of ACL rules: 224
- Jumbo frame support: up to 9K packet
size
- Acoustic noise: 38.6 dB
- Heat Dissipation: 131.439 BTU/hr
- Mean time between failure (MTBF):
239,032 hours (~27 years)
- User Interfaces
- Command Line Interface (CLI) via
console port (4 sessions)
- Web-based management via embedded
HTTP server protected with Secure Sockets
Layer
- (SSLv3) or Transport Layer Security
(TLSv1)
- Telnet remote login (5 sessions)
securable with Secure Shell (SSH v1.5,
v2)
|
|
Electrical Specifications |
- Power consumption: 38.5W maximum
- Redundant power supply input: 12V
|
|
Electromagnetic Emissions |
- CE mark
- EN 55022 Class A - Emissions
- EN 55024 - Immunity
- FCC Part 15 Class A
- VCCI Class A
- C-Tick
|
|
Physical Specifications |
- Dimensions (w x d x h): 440 x 205
x 43 mm (17.3 x 8.1 x 1.6 in)
- Weight: 3.65 kg (8.03 lb)
|
|
Environmental Specifications |
- Operating temperature: 0° to 40°
C (32 to 131° F)
- Storage temperature: -20° to 70°
C (-4° to 158° F)
- Operating humidity: 90% maximum
relative humidity, non-condensing
- Storage humidity: 95% maximum relative
humidity, non-condensing
- Operating altitude: 10,000 ft (3,000
m) maximum
- Storage altitude: 10,000 ft (3,000
m) maximum
|
|
Safety |
- CE mark
- EN 60950-1
- UL/cUL 60950-1
|
|
Modules |
- ProSafe AGM731F 1000BASE-SX SFP
GBIC
- ProSafe AGM732F 1000BASE-LX SFP
GBIC
- ProSafe AGM733 1000BASE-ZX SFP GBIC
- 100FX SFP LC transceiver
|
|
Warranty |
- NETGEAR Lifetime Warranty
|
|
Package Contents |
- ProSafe Gigabit L2 Managed Switch
with Static Routing (GSM7224R)
- Null modem cable
- Rubber footpads
- Power cable
- Rack-mount kit
- Installation guide
- Resource CD-ROM
- Warranty/support information card
|
*Basic technical support
provided for 90 days from date of purchase.
Diagram:

|
NETGEAR Managed Gigabit Switches |
| NETGEAR ProSafe GSM7224R
24 Port Gigabit L2 Managed Switch With Static Routing |
#GSM7224R-100NAS
List Price: $1,185.00
Our Price: $829.99 |
|
|